The Alien EasyFeed Elbows are perfect for putting a bend in your pipe.

Perfect for building your own amazing irrigation system.

These Tee and Y pieces can be used to split your pipe into two outlets. The barbed design gives them a good, tight fit when placed into an irrigation pipe, stopping any leaks and keeping the pressure contained.

See all available sizes.

Barbed reducers connect differing sizes of pipework together, creating a leak-proof seal and giving increased strength to your indoor hydroponics set up.

Available: 12mm | 16mm | 20mm

The Barbed Elbows are perfect for putting a bend in your pipe.

Available: 12mm | 16mm | 20mm

Barbed Stop Ends can be pushed straight onto the length of the pipe, capping the end.

Available: 12mm | 16mm | 20mm.

Barbed and threaded flow taps allow you to expand or clean your system without actually turning it off. You can control the flow of water or isolate sections just by using the tap. These valves also help you to get an even amount of feed to each dripper and plant as well as balancing the water pressure.

Available: 12mm | 16mm | 20mm.

Threaded Tee Pieces allow you to create multiple watering points from your irrigation system.

See all available sizes.

For rapid expansion of your Hydroponics indoor gardening irrigation solution. Manifolds simply screw into your irrigation system, meaning there's no need to punch holes into your pipes. They are quick and easy to build and can connect up to 8 drippers.