Description
The IWS Trident pot is the latest development from IWS. Trident simplifies system setup due to the use of rubber grommets, push-fit fittings, and a built-in stand. By removing the need for additional components, IWS Trident is quick and easy to set up as part of a system. Features including the central, bottom feed port, root rods, and tie-back rings allow plants to grow bigger, stronger, and more luscious than traditional pots. Additionally, IWS Trident comes with cloth inner pots, meaning Trident is suitable for any media type.
HOW IT WORKS
Nutrients are pumped from the FlexiTank to the IWS Control Unit at specific times and durations set by the user using the IWS minute timer. The Control Unit is directly connected to the Trident pots via IWS Pro pipework. As the Control Unit fills up, nutrients are gravity-fed to the Trident pots. Unlike traditional Flood & Drain pots, Trident pots fill from the bottom, allowing for full saturation of the root zone and preventing roots from blocking the pipework.
The IWS Trident pots are filled until the top float valve inside the IWS Control Unit is engaged. This stops the flow of water from the FlexiTank. The float height is the same as the top of the pots, preventing the system from ever flooding. You can easily add the Trident pot to any Pro IWS System.
Each Trident pot includes a cloth inner pot that promotes plant growth by allowing air to pass through tiny holes, encouraging air pruning and creating a dense root zone. The cloth pot sits on top of root rods located at the base of the IWS Trident. These rods encourage roots to break through the walls of the cloth pot, wrap around, and prevent the roots from growing down the pipe and causing blockages.
The outer rim of Trident pots has tie-back rings, allowing growers to spread the foliage and increase the plant canopy.
KEY VALUES
- Simple Set Up
- No Stand Required
- Cloth Inner Pots
- Root Rods
- Bottom Feeding
- Tie-Back Rings
- Adaptability
Shop IWS Trident Accessories here.